Lietuvių
Latviešu
Pусский
“Select a manufacturer:”
x10003
SUPPLIER CODE10003
SUPPLIERK2
Supplier: K2
Supplier code: 10003
Stock and pricing information is only available to logged-in users
K2 SILTEC is a high-quality, elastic oxime-based sealant for sealing with an operating temperature range of -60 to + 300 ° C. The sealant does not cause corrosion. Resistant to vibration, oil, grease, petrol, coolant and water. A great alternative to rigid seals. Instructions for use: Remove old sealing residues. Clean and degrease the sealing surface. Apply K2 Silitec and distribute it evenly on one side of the seal. Join the sealing surfaces immediately. Close immediately after use. Freezing time 8-12 minutes; Fully hardens 3mm layer in 24h. Operating temperature: from + 5 ° C to + 30 ° C Purpose: for sealing oil sumps, valve covers, water or oil pumps, gearbox housings, drive shaft housings, thermostat housings, camshaft housings, differential housings, various connections.
x10705.
SUPPLIER CODE10705
SUPPLIERK2
Supplier: K2
Supplier code: 10705
Stock and pricing information is only available to logged-in users
K2 FLOWABLE SILICONE - lubricated silicone. Effectively fills even invisible and hard-to-reach gaps around glass, lamp covers, skylights. Effectively seals door and window seals as well as window frames. It can also be used to seal parts that are in direct contact with water, e.g. boats, aquariums, swimming pools. It freezes after one hour. Creates a flexible, durable, waterproof seal, resistant to vibration, extreme temperatures and weather conditions. It binds to glass, rubber, plastic, wood, concrete, and more. Tensile strength 215 psi, tensile ratio 195%. USE: 1. Thoroughly clean and dry the surface. 2. Apply around the leak, then remove excess. It solidifies in 1 hour and reaches full tightness after 24 hours. After complete solidification, check that the tightness is sufficient. Repeat if necessary.
